How the EMF Protection Shield Works by Naisha Ahsian, Co-Author of the Book of Stones

BookofStones

naishatwo.jpg

 

Personal Experience

5/20/2007
Within 1 minute of holding the shield, I felt a coherence being established in my energy field, which is what made me decide to try it on. Having felt other “shields” and having a negative reaction to them, this was a surprise.

After 5 minutes of wearing the shield, a noticeable increase in the amplitude of my energy field occurred, resulting in a heightened sense of centeredness and focus. My vision markedly improved, becoming very crisp and clear, and my spherical awareness was greatly increased (awareness of all that was going on around me at once, without it being a distraction from my conversation with Virginia).

I immediately felt that this shield is significantly different from the other similar devices I have experienced. With the other shields, there was a sense of a static frequency that was not flexible or adaptable—actually limiting my energy field’s ability to move and expand.

Also, the increase in amplitude is critical, as amplitude is the driving force behind electromagnetic energy. By increasing your field’s amplitude, the BioElectric shield ensures that your energy is the “driving force” in any given situation and is LOUDER than the energies of electronics or other EMF interference. This was both exciting and suprising, as I have yet to encounter any technology that increases the amplitude of the human EMF without conscious effort.

5/23/07
Over the past three days I have noticed the following:

1. Increased energy & stamina. I hiked up Mt. Shasta with no sense of tiredness or fatigue, even though I had not eaten in over 24 hours. I am sleeping less, but feel more rested and less fatigued and logey upon waking.

2. Less brain chatter. This is a big one for me, as it indicates that the parasympathetic nervous system is engaged more fully than the sympathetic—in other words, less stress effects.

3. Less emotional reaction: again, probably due to operating from the parasympathetic nervous system.

4. Huge difference in my experience in flying cross country. I don’t have the fatigue and “buzziness” that I usually feel when flying for long distances. I don’t have the “cooked” feeling.

5. More ease in reaching and maintaining Primus state.

June 8, 2007
I’ve just completed an 8 day cleansing fast and found it to be one of the easiest fasts I’ve ever done! I have no doubt that wearing the BioElectric Shield during my fast was the primary reason it went so easily. Usually, an 8 day fast is an energetic trial for me, with the usual fatigue, headaches, and other detox symptoms making the first few days unpleasant. This time, however, my energy continued to be high and even throughout the fast. Detox symptoms were reduced drastically, and my mood was great throughout! The only thing I have done differently this time is to wear the BioElectric Shield. This has been a real, solid proof to me of the shields’ ability to regulate my energy field. I feel great!

 

Nairsha Explains how the Shield Works

Any device that is constructed to protect you from electromagnetic fields, or regulate your own electromagnetic field, must take two separate aspects of electromagnetic energy into account. These are frequency and amplitude. The first of these, frequency, describes the amount of photonic energy in an electromagnetic wave. A high frequency wave will have more photonic energy than a low frequency wave. Frequency is the primary term used to describe how energy devices affect one’s energy, but in reality, it is only half of the story. The other half is amplitude, which describes the loudness of a frequency. Amplitude, not frequency, is the driving force behind determining which energy “wins” when two energy fields interact.

 

1. Amplitude.

Let’s begin by looking at amplitude and its effects. Amplitude describes the volume or loudness of a frequency. Frequencies can be quiet or loud—low or high amplitude. Just as music that you play on your stereo can be played either quietly or loudly. The frequency of the music doesn’t change when you turn it up or down. It is the same with the human electromagnetic field. We can have either a quiet (low amplitude) or loud (high amplitude) field at any given time.

When two vibrating bodies come into contact, nature uses a special hierarchy to determine how those fields interact. This hierarchy is governed by the law of resonance. Amplitude is the first order of this hierarchy. The “louder” vibrating body will cause the more “quiet” vibrating body to take on its energetic characteristics. In other words, the louder vibration wins.

This is a problem when you are looking at the loudness of, for instance, the microwave radiation coming from a cell phone. The amplitude of that frequency may be loud enough to cause a human energetic field to move into resonance with it—causing all kinds of havoc down to the cellular and even the molecular levels. We know, for instance, that microwave and other electromagnetic frequencies can cause the DNA to activate and deactivate different parts of its molecular structure—creating cell mutation, including cancers.

In my experience, the BioElectric Shield acts to increase the amplitude of one’s personal electromagnetic field. In doing so, it makes it less likely that other EMFs (such as those from cell phones, radio & tv broadcast towers, computers and electronics, etc.) will be able to affect your vibration. In fact, having a higher amplitude energy field will ensure that you will become the driving force in any energetic interaction. This effect alone makes this device worth its weight in gold, as deficient amplitude is the main reason that one’s energy field is affected by external EMFs.

But, it is not just electronically generated electromagnetic fields that we need to be concerned about. The electromagnetic fields of others (their “aura”) can also interfere with one’s own energy systems. Think of someone who is in a very angry emotional state. The amplitude of that person’s energy field may be very loud because of their strong emotional energy. If you move into their energetic space (within about 12 feet of them!), your heart and brain will pick up their emotional energy as an electromagnetic signal. Your brain will then manifest those emotions by changing the biochemistry in your own body. It has been shown in clinical studies that, when two people are within 4 feet of each other, the person with the louder energy field will dictate the biochemistry of the person with the quieter field. And, this effect occurs on a subconscious or unconscious level and is not necessarily even noticed until you’ve already taken on someone else’s energetic and biochemical patterns. This means that, without protection, you could be manifesting the stress biochemistry of everyone around you—whether you are stressed or not!

This effect is the main reason why healers tend to pick up their client’s energy patterns and may manifest their client’s illnesses in their own body. This is especially true if the client is in a strong emotional state. One way to prevent this would be to guarantee that the healer’s amplitude is louder than that of the client’s energy field. This is exactly what the BioElectric shield does!

The same effect occurs when a person begins to open up psychically and finds that they become overwhelmed or even made ill by the psychic input they are receiving. By simply turning up their personal energy field’s amplitude, the psychic will find that they no longer get “hit” by the energies, emotions and negativity of others. In my experience the BioElectric shield is a powerful protection device because it works with these laws of physics to ensure that one’s own lectromagnetic field is both balanced and of a sufficient amplitude that it offers protection from intereference by external EMFs.

With the proper level of amplitude, one is not only less affected by external EMFs, but is also less likely to get psychically “hit” when exposed to strong emotions or “negative” energies emanating from others or within the environment. Healers are less likely to pick up the energetic imbalances of clients. People are less likely to be negatively affected by the energies coming off their cell phones and computers, and will find themselves to be less drained, less out of sorts and more able to experience a balanced, healthy energy field!

2. Frequency:

One of the reasons I was hesitant to work with the BioElectric Shield at first was because I had experimented with other devices that claimed similar effects, yet had an unpleasant effect on my energy field. These devices were specifically tuned by computer to certain frequencies-- usually the frequency used is the Earth’s base resonant frequency signature of 7.8 Hz. On the surface, this appears to be a good idea. We all need to be more attuned to the Earth’s EMF in order to receive a broad spectrum of light energy that is naturally provided by the Earth.

While these devices did entrain my energy, I found that the energy entrainment was static—meaning that my energy could not move up or down as needed. Instead, it was inflexibly entrained to that one specific frequency, giving me the distinct feeling of being energetically “stuck”. Certainly, vibrating with this frequency is better than vibrating with the microwaves coming from a cell phone or computer. But, I found that I had a much more difficult time reaching a meditative state while wearing these artificially tuned devices. Also, the energy seemed to dissipate over time as the device became noticeably weaker. After a couple of months, I simply stopped wearing these energy devices because they simply didn’t feel very good.

One of the immediate things I noticed with the BES is that it allowed for oscillation adjustment, allowing my energy to easily increase in frequency or decrease in frequency as needed (for instance, during meditation). It was a flexible, responsive field of energy, not a static, “stuck” energy.

I believe that this flexibility in the BioElectric Shield is due to the natural quartz that is used in the device. Quartz makes up about 80% of the Earth’s crust and it has one of the broadest frequency spectrums of any mineral. Because of this, quartz carries a frequency spectrum that is inherent to our bodies and nervous systems, reflecting the natural, full spectrum energy of the Earth’s EMF—not just its base resonant frequency of 7.8 Hz.

Other devices are tuned to one specific frequency, not a natural spectrum as is the BioElectric Shield. The Earth is currently undergoing changes in its frequency spectrum, and we need to maintain a close connection to the Earth’s energy in order to maintain our health and wellbeing. The BioElectric Shield provides not only amplitude protection, but also frequency adaptation, allowing your energy to adapt to changes while still offering protection from artificially generated EMFs.

Cleansing & charging the BioElectric Shield

The BioElectric Shield informational and instructional materials suggest placing the shield in sunlight once a month in order to clear it and recharge its energy. How can placing an item in sunlight cause it to recharge? In order to understand how this simple technique recharges the shield, we need to look at the physics of the crystals used in the shield.

Quartz crystals are both piezoelectric and pyroelectric. Piezoelectricity is a state in which an electric pulse is emitted by the stone when it is compressed. Pyroelectricity is a state in which an electric pulse is emitted when a quartz crystal is heated or cooled rapidly. It is this second quality of pyroelectricity that allows the quartz crystals and other stones in the BioElectric Shield to clear and recharge when the shield is placed in sunlight.

To understand this more fully, think of how rapidly an object heats up when it is left in the sun. when a BioElectric shield is placed in the sun, the rapid heating of the quartz and other stones inside causes them to release an electrical charge. This pulse of electrical energy clears the stones, allowing them to return to their natural base resonant frequency and breaking any resonance with undesirable energies.

The light of the sun is made up of tiny packets of energy called photons. These tiny particles are subatomic, meaning that they are smaller than an atom. When your shield is placed in sunlight, the atoms of the quartz and other stones inside are bombarded by these tiny packets of energy, stimulating them and causing their atoms to become “excited”. This stimulation acts to “charge” the crystals and re-empower them so that they are once again returned to optimum function.

So, by simply placing your BioElectric shield in sunlight for a few hours, the stones within the shield are cleansed and recharged. This process can be repeated an unlimited number of times because it works using the basic laws and principles of natural physics.

Other “shield” products from other manufacturers may need to be returned to the manufacturer to be recharged because they are artificially attuned and/or powered with batteries which become depleted. The BioElectric shield won’t become depleted if you simply place it in the sun once a month. How elegant!

How the Shield Works - Now that you have read Naisha's explanation, you can also read our explanation of how the Shield is able to do the energy work she describes.

Purchase Naisha's books and products at Amazon.com

Pin It
energy protection

Energy Protection

  1. Protect your body
  2. Shield your electronics
  3. Reduce EMF in your home

Get Protection Now

testimonials

Testimonials

  • Increased focus
  • Renewed Energy
  • Less Stressed and Happier

Product Reviews